Sunday, 30 July 2017

Got My drill press yesterday so today I started on the holes in the sprockets.

Centering drill.

Pilot drill.

Pilot holes done in all of the sprockets.

 Tungsten carbide tipped hole saw. Much faster then a normal bi-metal hole saw.

40x 16mm holes.

Looking good.

 Lightened 203g. It was 784g. That's a total of 812g lighter for the 4 sprockets.

Tomorrow I will start on the drive sprockets.
I have uploaded a video of the 16mm hole drilling.

Friday, 28 July 2017

Started on building the track tensioner.




Tensioner with the motor mount.

Saturday, 15 July 2017

Started making the parts for the track tensioner.


Test drive of the track drive.



I also have done a video of the track drive test. See it on my videos page.

Monday, 10 July 2017

Got the temporary frame made to hold the axles and track in place.


All together and it rolls.


Motor mount and lower roller wheel.

Wednesday, 5 July 2017

#35 - 30 tooth sprocket.

#35 - 30 tooth sprocket.

#60 - 12 tooth sprocket.

#60 - 20 lightened tooth sprocket.

#60 - 28 lightened tooth sprocket.

Sunday, 2 July 2017

Working out the width of the lower roller wheels.

Saturday, 1 July 2017

Plates made for the idle arm.

Lower roller wheels made. Final version will be rubber.